Peak Oil News >> Hydrocarbon Alternatives >> Pliable Solar Cells Are On A Roll

k_semler writes: Imagine wearing a jacket or rucksack that charges up your mobile phone while you take a walk. Or a tent whose flysheet charges batteries all day so campers can have light all night. Or a roll-out plastic sheet you can place on a car's rear window shelf to power a child's DVD player.

Such applications could soon become a reality thanks to a light, flexible solar panel that is a little thicker than photographic film and can easily be applied to everyday fabrics. The thin, bendy solar panels, which could be on the market within three years, are the fruit of a three-nation European Union research project called H-Alpha Solar (H-AS).

New Scientist

The new solar panels will be cheap, too, because they can be mass-produced in rolls that can be cut as required and wrapped around clothes, fabrics, furniture or even rooftops. "This technology will be a lot easier to handle than the old glass solar panels," claims Gerrit Kroesen, the physicist from Eindhoven University of Technology in the Netherlands who led the development team.

Kroesen's team has made its solar cells bendy simply by making them thin. But this has involved a trade-off. While the best solar cells are now working at efficiencies above 20%, the H-AS cells are only about 7% efficient. The researchers think efficiency is worth sacrificing for a cell that is going to be more generally useful, though they still hope eventually to reach 10% efficiency.

Electron knockout

Conventional solar panels are made of pairs of sheets of semiconducting silicon, doped with phosphorus and boron atoms. Electrons in the phosphorus-doped (N-type) layer migrate across the boundary to occupy holes left in the boron-doped (P-type) material, setting up a voltage across the boundary between the two layers. When photons hit the silicon in a cell they knock electrons out of its crystal structure, generating a current that is collected by a mesh of metal contacts.

The H-AS solar panels are constructed in a similar way, but they are made just 1 micrometre thick by depositing polymorphous silicon at high pressures and temperatures. "Polymorphous silicon is as rigid as crystalline silicon. But because it is less than a micrometre thick it is flexible," Kroesen says. Today's solar panels are typically somewhere between 4 and 10 millimetres thick.

The process of producing H-AS films involves temperatures of up to 200Â°C, which would melt a plastic substrate. So instead of depositing the doped layers directly onto plastic they are first deposited onto aluminium foil.

After the assembly has cooled, a plastic carrier layer is added underneath it and the aluminium is removed and recycled. Contacts are then added, followed by a protective plastic layer on top, too. This sequence lends itself to continuous production on rolls of plastic film.

The Swedish and Dutch-owned company Akzo-Nobel, a partner in the H-AS research, already has a pilot plant producing rolls of silicon cells 40 centimetres wide. A projected full-scale manufacturing plant would produce panels at a cost of about 1 euro per watt. An A4-size panel sewn onto the back of a jacket and costing less than 10 euros would charge a mobile phone during a summer stroll. The company has not yet decided to go ahead with the plant.

Jeremy Leggett, chief executive of the UK solar cell supplier Solar Century, is impressed, describing the 1 euro per watt price point as "breathtaking".